Simulation analysis of the dynamic balance of the reed part in the beating-up mechanism of a loom to study effective parameters.

Authors

  • KARIMOV RUSTAM JAXONGIR UGLI PhD, Fergana State Technical University) Author

Keywords:

Keywords: Loom, beating-up mechanism, reed, dynamic balance, vibration, mathematical model, computer simulation, design optimization, effective parameters, fabric quality.

Abstract

This paper focuses on the development and optimization of crepe fabric production using advanced weaving techniques. Crepe fabric is highly valued for its unique texture and elegant appearance. Producing this fabric requires precise control of yarn tension and mechanical parameters. The research examines the effect of warp and weft densities on fabric quality. A mathematical model was developed to simulate the dynamic behavior of the yarns. Experiments validated the model’s accuracy and helped identify optimal parameters. The use of spring-supported reeds significantly reduced yarn breakage. Springs ensured uniform yarn tension even at high operating speeds. Weaving processes were analyzed using advanced simulation tools. The data revealed the relationship between reed design and fabric quality. Optimizing the settings improved fabric durability and reduced defects. It was experimentally proven that uniform load distribution across the yarns enhances texture consistency. The recommendations developed are applicable not only to the tested equipment but also to other weaving machines. The study also includes an analysis of the interaction between the equipment's mechanical components. The findings are highly relevant to the textile industry. The research offers new approaches to minimizing yarn damage. Process optimization improves productivity and fabric quality. The results contribute to industry development and support the adoption of innovative solutions.

References

1.Kuchar, M., & Siczek, K. (2016). Simulation of a vibrating reed exciter for thickening different fabrics in weaving loom. Mechanics, 22(5), 410-415.

2.Jin, Y., Xiong, H., & Cui, J. (2022). Analysis of the characteristics of air–yarn coupling movement in the profiled reed groove of an air-jet loom. Textile Research Journal, 92(7-8), 1276-1287.

3.Wang, K., & Guo, S. (2022). Dynamic balance design and simulation verification of reed system of loom beating up mechanism. In MATEC Web of Conferences (Vol. 358, p. 01007). EDP Sciences.

4.Савченко, П. Е., & Редько, Е. А. (2018). Обзор численных методов решения обыкновенных дифференциальных уравнений. Решение задачи Коши методом Рунге-Кутта 4-го порядка. In Материалы секционных заседаний 58-й студенческой научно-практической конференции ТОГУ (pp. 375-379).

5.Neogi, S. K., & Bhattacharyya, P. K. (1988). Reed Mark of Fabric and Its Relation with Warp Tension at Beat-up with Different Loom Settings.

6.Kuchar, M. (2016). The impact of the frequency of reed vibrations on improving the conditions in thickening dense technical fabrics. Textile and Apparel, 26(4), 380-384.

7.Nosraty, H., Jeddi, A. A., & Mousaloo, Y. (2008). Simulation analysis of weft yarn motion in single nozzle air-jet loom to study the effective parameters.

8.Wang, K. (2023, October). Dynamic analysis and simulation of four-bar beating up mechanism. In Ninth International Conference on Mechanical Engineering, Materials, and Automation Technology (MMEAT 2023) (Vol. 12801, pp. 357-363). SPIE.

9.KAPLAN, V., & TURHAN, Y. (2014). DETECTION OF WARP ELONGATION USING IMAGE PROCESSING IN SATIN FABRIC. TEXTILE SCIENCE AND ECONOMY, 185.

10.Debin, W., Xunming, M., & Weihang, L. (2020, May). Simulation and analysis of piezoelectric actuator under weft insertion. In 2020 5th International Conference on Electromechanical Control Technology and Transportation (ICECTT) (pp. 251-255). IEEE.

11.Çelik, H. İ., Dülger, L. C., & Topalbekiroğlu, M. (2022, May). Design and Simulation of Beat Up Mechanism: Handmade Carpet Looms. In 2022 8th International Conference on Control, Decision and Information Technologies (CoDIT) (Vol. 1, pp. 809-814). IEEE.

12.He, H., Zhang, L., & Kong, J. (2016). Kinematic Accuracy Analysis of Lead Screw Weft Insertion Mechanism with Flexibility. In Proceedings of the 2015 International Conference on Applied Mechanics, Mechatronics and Intelligent Systems (AMMIS2015) (pp. 163-170).

13.Xu, Y. K., Zhang, L., Pan, X. Y., Xu, S. F., & Wang, B. H. (2012). Analysis of Rod Length Change in the Rapier Weft Insertion Mechanism Transmitted by Spatial Four Bars. Advanced Materials Research, 382, 195-199.

14.Sever, E. F. (1985). Modelling and analysis of picking mechanism on shuttle looms (Master's thesis, Middle East Technical University).

15.Ghosh, A. (2019). Kinematic Analysis of Different Shedding Cams Used in Weaving Looms. Industrial Engineering Journal, 12(12).

16.Zhou, K., Yin, Z., & Zhang, X. (2021, July). Kinematics and Dynamics Analysis and Simulation of Spherical 4R Mechanism. In Proceedings of the 6th International Conference on Intelligent Information Processing (pp. 172-176).

Downloads

Published

2026-10-23