AN INTEGRATED FRAMEWORK FOR TECHNICAL CONDITION ASSESSMENT AND OPERATIONAL SAFETY OF HYDRAULIC STRUCTURES: PROPOSED APPLICATION TO THE BESHARIQ HYDRAULIC COMPLEX

Authors

  • Sitora Mardonova Master’s student at the Department of Hydraulic Structures and Pumping Stations, Bukhara State Technical University. Author

Keywords:

Keywords: hydraulic structures; technical condition assessment; operational safety; hydraulic complex; structural monitoring; maintenance planning; Beshariq.

Abstract

The reliable operation of hydraulic structures requires systematic assessment of their physical condition, hydraulic performance, and operational readiness. This article proposes an integrated assessment framework for potential application to the Beshariq Hydraulic Complex. The framework combines document review, visual inspection, targeted instrumental investigation, and potential failure mode analysis. Particular attention is given to concrete deterioration, seepage, structural movement, gate operation, and erosion. An assessment matrix is proposed to connect observable defects with verification methods and management responses. The framework distinguishes physical condition from failure consequences and explicitly records uncertainty where evidence is incomplete. Its practical output is a component-based inspection register and a prioritized action plan. Since site-specific inspection records and monitoring data were not available for this study, the article presents a methodological proposal rather than an empirical safety evaluation. Field application is necessary to establish the actual condition of the complex and validate the proposed assessment procedure.

References

1.U.S. Bureau of Reclamation. (2017). Canal operation and maintenance: Concrete lining and structures. U.S. Department of the Interior. Full text. usbr.gov

2.Federal Energy Regulatory Commission. (n.d.). Dam safety performance monitoring program (DSPMP) and potential failure modes analysis (PFMA). Website. Federal Energy Regulatory Commission

3.von Fay, K. F. (2015). Guide to concrete repair (2nd ed.). U.S. Department of the Interior, Bureau of Reclamation, Technical Service Center. Full text. govinfo.gov

4.Federal Emergency Management Agency. (2023). Federal guidelines for dam safety (FEMA P-93). Full text. www.fema.gov

5.Federal Energy Regulatory Commission. (n.d.). Engineering guidelines for the evaluation of hydropower projects: Chapter 9—Instrumentation and monitoring. Guidelines. Federal Energy Regulatory Commission

6.Federal Energy Regulatory Commission. (2021). Engineering guidelines for the evaluation of hydropower projects: Chapter 17—Potential failure mode analysis. Publication record. File List

Downloads

Published

2026-10-28