EXPERIMENTAL AND NUMERICAL ASSESSMENT OF THE INFLUENCE OF SPEED PROFILE PARAMETERS ON HYDRAULIC RESISTANCE IN SMOOTH AND ROUGH PRESSURE PIPELINES
Keywords:
Keywords: turbulent flow, pressure pipeline, Karman parameter, logarithmic velocity profile, hydraulic resistance, Reynolds number, equivalent roughness, ANSYS Fluent, numerical modeling.Abstract
The article analyzes the relationship between the logarithmic velocity profile parameters of turbulent flow in smooth and artificially rough pressure pipelines—the Karman parameter κ—and the free terms C1 and C2 with the hydraulic resistance coefficient λ. Empirical relationships based on the regression processing of Nikuradze's experimental profiles have been systematized, and their mathematical interdependence and application limits have been clarified. For smooth pipes, the dependence of κ and C1 on λ and the Reynolds number, the implicit resistance equation obtained by integrating the velocity profile, and the classical Nikuradze and Blazius dependencies were compared. It is shown that the interpretation of κ and C2 as a strictly monotonic function is limited due to the scattered nature of the experimental points along the rough pipes. To verify the results in the ANSYS Fluent environment, a numerical experimental methodology was developed, including geometry, a grid, a turbulence model, wall roughness, and evaluation criteria. Calculative analysis showed the need to evaluate the velocity profile parameters not as universal constants, but as effective parameters determined within the range of the flow under study.
References
1.Nikuradse, J. (1950). Laws of flow in rough pipes. NACA Technical Memorandum 1292.
2.Colebrook, C. F., & White, C. M. (1937). Experiments with fluid friction in roughened pipes. Proceedings of the Royal Society A, 161, 367–381. https://doi.org/10.1098/rspa.1937.0150
3.Colebrook, C. F. (1939). Turbulent flow in pipes, with particular reference to the transition region between the smooth and rough pipe laws. Journal of the Institution of Civil Engineers, 11, 133–156.
4.Bailey, S. C. C., Vallikivi, M., Hultmark, M., & Smits, A. J. (2014). Estimating the value of von Kármán’s constant in turbulent pipe flow. Journal of Fluid Mechanics, 749, 79–98. https://doi.org/10.1017/jfm.2014.208
5.Haaland, S. E. (1983). Simple and explicit formulas for the friction factor in turbulent pipe flow. Journal of Fluids Engineering, 105(1), 89–90. https://doi.org/10.1115/1.3240948
6.Moody, L. F. (1944). Friction factors for pipe flow. Transactions of the ASME, 66, 671–684.
7.Pope, S. B. (2000). Turbulent Flows. Cambridge University Press.
8.Pirozzoli, S., Romero, J., Fatica, M., Verzicco, R., & Orlandi, P. (2021). One-point statistics for turbulent pipe flow up to Reτ≈6000. Journal of Fluid Mechanics, 926, A28. https://doi.org/10.1017/jfm.2021.727
9.ANSYS, Inc. (2025). Ansys Fluent Theory Guide: Near-Wall Treatments for Wall-Bounded Turbulent Flows.
10.ANSYS, Inc. (2025). Ansys Fluent User’s Guide: Wall Roughness Effects and Boundary Conditions.
11.Schlichting, H., & Gersten, K. (2017). Boundary-Layer Theory (9th ed.). Springer.
12.White, F. M. (2016). Fluid Mechanics (8th ed.). McGraw-Hill Education.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Articlelibrary

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.